Adjusting the Wetness of the Sealer

You can adjust the wetness setting to increase or decrease the amount of sealant that is applied to the envelope.

If you adjust this setting via the Settings application, you are setting the default for the system.
If you adjust the wetness whilst changing the sealing method on the Run Mail screen, you are customising the wetness setting for a specific job.

Select the Settings button on the Home screen.
The Settings screen displays. Select Hardware.
Select Sealer.
Select the Sealer settings tab.
Select and drag the control button to adjust the wetness. 1 is the driest setting; 9 is the wettest. Use the + and - buttons for a more precise selection.
Select Run test envelope to test your adjustment.
Place an envelope on the feed deck and select Start. The system will feed and seal the envelope.
Check the envelope to ensure the moistness adjustment is correct.
Select Done to return to the Home screen.