Refilling the Tape Sealant Bottle

Refill the tape sealant bottle when your Sealing Solution is running low.

NOTE: Pitney Bowes recommends using E-Z Seal® Sealing Solution because it helps keep your moistener tank clean and improves sealing performance.

  1. Lift the tape sealant bottle out of the cradle. The bottle is located to the right of the printer module, behind the stacker.
  2. Remove the cap from the bottle.
  3. Add enough Sealing Solution to bring the level up to the bottom of the throat of the bottle. Do not overfill the tape sealant bottle.
  4. Replace and tighten the cap and return the bottle to its original position.
ClosedRelated Topics