Running a Job with an Attached Scale

If you have a large mail piece that cannot be fed through your machine and you have an attached scale, use the Attached Scale method.

To enter Attached Scale Mode:

  1. Select the Run Mail button from the Home screen.
  2. Select a job that uses an attached scale or select the Weighing icon.
    1. Select the Attached scale option.
    2. Make sure the scale reads 0 when there are no mail pieces or any objects on the scale. If necessary, select Zero scale.
    3. Select OK.
  3. Place the mail piece on the scale. The amount displays next to the Weighing icon.
  4. If you are printing on tape, select Tape. If you are printing postage on the mail piece, place the piece on the feed deck and select Start.

NOTE: The system will automatically select this method if you place a piece of mail on your attached scale. The system will display the weight of the mail piece next to the Weighing icon on the Run Mail screen. If the scale is not set to zero when there is no weight on the scale you can reset it to zero.

ClosedRelated Topics